HIFI Single-end Output Transformer 3.5W 8K For 6DJ8+5686 Headphone Amplifier
$28.99
In stock
SKU
ei10196
HIFI Single-end Output Transformer 3.5W 8K For 6DJ8+5686 Headphone Amplifier
When testing the machine, the output transformer must be connected with a horn or resistor as a load. The no-load test is very easy to burn the transformer. This burnt shop is not guaranteed.
3.5W output transformer
Core size: 19*30
Winding method: 3 clips 2
Inductance: L >= 30H @500HZ
Passband: 30HZ-25KHZ (those with a frequency range of 20HZ-30KHZ, if the inductance is lower than ours, it is a false value)
Primary: 8K ohm 0.12MM 3673T Air Gap 0.07MM
Secondary: 0-64-200 ohm
Center hole distance: 73mm
Width 58* Height 51* Thick 63
Core material: Japan Z11 0.35MM thick insulating annealing sheet
1pcs(90 days after receipt of order )
Write Your Own Review